Specifications

Managing Mobility Integrating WLAN Controllers with the Mobility Router
9
ShoreTel Mobility Router Administration Guide 114
Modifying Route Points
To modify a route point:
1. Select Configuration > Mobility > Enterprise Locations. The Enterprise Locations page
displays.
2. Click the campus, then a building, then a specific floor. The Route Point tab for that floor displays
at the bottom of the page.
3. Select the Route Point to be modified.
4. Click Modify.
5. Make changes as appropriate. The following options are available:
 Type: You can change the Route Point type. Available options are network edge or network
center.
 View, commit, or delete the calibrations and fingerprints for this Route Point.
Deleting Route Points
To delete a Route Point:
1. Select Configuration > Mobility > Enterprise Locations. The Enterprise Locations page
displays.
2. Select a campus, then a building, and then a specific floor. The Route Point tab for that floor
displays.
3. Select the Route Point to be deleted.
4. Click Delete. The Route Point is deleted.
Integrating WLAN Controllers with the Mobility Router
You can perform the following tasks for WLAN controllers:
 “Adding WLAN Controllers” on page 114
 “Modifying WLAN Controllers” on page 116
 “Deleting WLAN Controllers” on page 117
Adding WLAN Controllers
Be sure that you have the following controller information before adding a WLAN controller:
 Vendor and IP address of WLAN controller
 Community string for the WLAN controller
 Whether enterprise location information is configured for the WLAN controller