Specifications
Managing Mobility Managing Enterprise Locations
9
ShoreTel Mobility Router Administration Guide 110
Managing Enterprise Locations
Creating an enterprise location consists of the following steps:
“Creating Campuses” on page 110
“Creating Buildings” on page 111
“Creating Floors” on page 111
“Creating Route Points for a Floor” on page 112
In addition to manually creating an enterprise location, you can also integrate WLAN controllers with
the Mobility Router, as described in “Integrating WLAN Controllers with the Mobility Router” on
page 114.
Creating Campuses
Create an enterprise location to define the campus, buildings, and floors where the ShoreTel Mobility
solution is deployed.
To add an enterprise location:
1. Select Configuration > Mobility > Enterprise Locations. The Enterprise Locations page
displays.
2. In the Campus field, type the name of the campus. The campus name can be up to 64
alphanumeric characters long and can contain spaces, hyphens (-), and underscores (_).
3. Click Add. The new campus displays in the list below the Campus box.
Adding SSIDs to a Campus
After creating a campus, you need to create the Service Set Identifier (SSID).
To add an SSID to a campus:
1. Select Configuration > Mobility > Enterprise Locations. The Enterprise Locations page
displays.
2. Select the campus to which you want to add an SSID.
3. In the SSID field, type the name of the SSID. The SSID can be up to 50 alphanumeric characters
long and can contain spaces, hyphens (-), underscores (_), and apostrophes (‘).
4. To add the SSID to the campus, click Add.
Tip
You do not need to create enterprise locations for buildings or floors where there are no Route Points.