Specifications

Managing Mobility About Enterprise Locations
9
ShoreTel Mobility Router Administration Guide 107
Figure 49 shows the relationship between Route Points and default handover settings at an entry point
of a building.
Figure 49: Example of the Relationship Between Route Points and Default Handover Settings
A handover can take place for any of the following reasons:
 A Route Point triggers a handover to cellular as the user exits the building.
 A Route Point triggers a handover to Wi-Fi when the user enters the building.
 When the value specified in the Min Cellular to Wi-Fi Roam RSSI field is a match and the Route
Point is missed or not available, a handover to Wi-Fi occurs.
 When the value specified in the Min Wi-Fi to Cellular Roam RSSI field is a match and the Route
Point is missed or not available, a handover to cellular occurs.
Using WLAN Controllers to Retrieve Location Information
Currently, the ShoreTel Mobility solution supports integration of enterprise location information for
WLAN controllers from the following vendors: