Specifications

Managing Mobility Default Home Settings

ShoreTel Mobility Router Administration Guide 103

Default Home Settings

To review or change home-location default mobility settings:

1. Select Configuration > Mobility > Default Settings.

2. Click the Home tab.

Figure 45: Default Home Settings

3. In the Min Wi-Fi to Cellular Roam RSSI field, type the minimum Wi-Fi received signal strength

indication (RSSI) threshold below which a call is handed over from Wi-Fi to cellular. The default

value is -76. The recommended value is between -95 and -40.

4. In the Min Cellular to Wi-Fi Roam RSSI field, type the minimum Wi-Fi RSSI threshold that must

be available for a call to be handed over from cellular to Wi-Fi. The default value is -70. The

recommended value is between -95 and -40.

5. In the Min Voice RSSI field, type the minimum RSSI threshold for incoming and outgoing voice

calls. This value represents the minimum RSSI allowed for initiating a voice call. If this value is not

met or exceeded, then Wi-Fi is not available. The default value is -72. The recommended value is

between -95 and -40.

6. In the Max Packet Loss% field, type the maximum average percentage of voice packet loss

allowed before the call is handed over to cellular. The default value is 10%. If average packet loss

exceeds this value, the call is handed over to the cellular network if the cellular network is

available.

7. Click Apply to save changes.

8. The applicable Codecs display in the table. Use the Up or Down buttons to select the highest

priority codec supported by both ends. Move the codecs into their appropriately ranked order for

usage, the top codec being the highest priority. To modify the packet duration of a codec:

Note

Only Nokia devices support the use of home locations.