Specifications

Managing Mobility Enterprise Default Settings

ShoreTel Mobility Router Administration Guide 102

6. To enable use of multiple BSSIDs in your network, select the Multiple BSSID check box. To

disable this option, clear the Multiple BSSID check box. By default, this option is selected. We

recommend that you leave this option enabled. If the Multiple BSSID option is selected, you can

take calibration data from one WLAN, and that data can support all WLANs at that location. If this

option is not selected, each WLAN must be calibrated individually.

7. To save your changes, click Apply.

8. Table 5 displays the client-preferred PBX and Enterprise Codecs priority listing. The following

table displays each Codec’s supported packet size and default packet size.

Use the Up or Down buttons to select the highest priority Codec supported by both ends. Move the

Codecs into their appropriately ranked order for usage, the top Codec being the highest priority. To

modify the packet duration of a Codec:

1. Select the codec from the table.

2. Click Modify.

3. Modify the packet duration.

4. Click Apply to save changes and return to the main screen.

Table 5: Supported Codecs

Codec name Supported Packet Size Default Packet Size

G.711 μ-Law 20/30/40/60 20

G.711 A-Law 20/30/40/60 20

G.729 Annex- B 20/30/40/60 20

AMR 20/40/60 20

iLBC 30 30/60 30