Specifications

Configuring Authentication Managing RADIUS Authentication
8
ShoreTel Mobility Router Administration Guide 93
Managing RADIUS Authentication
You can specify a RADIUS server to be used for authentication as needed. Defining a RADIUS server
is optional based on the type of authentication to be used.
Configuring Default RADIUS Values
You can optionally define default values for certain RADIUS parameters that apply to all RADIUS
servers you create for the Mobility Router. The following RADIUS parameters can be defined with
default values:
 Key
 Timeout
 Retransmit
You can define default RADIUS values, but if you want to use different values for a particular RADIUS
server, you can specify different values when you create or modify that RADIUS server.
To configure RADIUS default values:
1. Select Configuration > System > Authentication > RADIUS.
Figure 40: RADIUS
2. Select an Interface. By default, the IP address associated with the primary interface is chosen.
This interface is used by the Mobility Router for communicating with the UC server.
3. In the Key field, type the password (also known as a shared secret key) used to authenticate to
the RADIUS server.
Note
This option is only configurable when used in conjunction with ShoreTel Connect.
Note
Provide the password that is the same password that is defined on the RADIUS server. The password
can be 1 to 32 characters long and cannot contain spaces or tabs.