Manualshelf

Specifications

ManualsBrandsShoreTel ManualsComputer equipmentMobility Router 4000
919293949596979899100
Configuring Authentication Adding a Directory Server Group
8
ShoreTel Mobility Router Administration Guide 85
4. Select an Interface. By default, the IP address associated with the primary interface is chosen.
This interface is used by the Mobility Router for communicating with the UC server.
5. Enter a fully qualified domain name (FQDN) or IP address of the ShoreTel Directory server in
Server Address field, or select Copy from PBX and use the name of the ShoreTel Directory
server already completed in Configuration > Voice > IP-PBXs. Copy from PBX is only available
with ShoreTel IP-PBXs.
6. In the Server Port field, use port number 80 or enter another appropriate port number.
7. Enter the Default Domain Name. This is the domain name added to the ShoreTel Directory Server
address field.
8. In the Bind User field, type the credentials used for authenticating with the ShoreTel Directory
Server.
9. In the Bind Password field, enter the Bind DN password to bind to the ShoreTel Directory Server.
This password must be available for the Mobility Router to make an authentication request.
10. In the Bind Timeout field, use the default timeout number 5 or enter another appropriate timeout
value.
11. In the Search Timeout field, enter the number of seconds to wait for a search response from the
server.
12. In the Max Search Entries Returned field, enter the maximum number of displayed search
responses.
13. Select Apply.
14. Select Query to perform the ShoreTel Directory search. The Query screen displays.
a. Enter a search string such as a user name in the Search For field. Refer to “Directory Query”
on page 266 for more information about this field.
b. By default, the Search In drop down menu displays the currently configured ShoreTel
Directory server. Select the specific ShoreTel Directory server to complete a search. Refer to
“Directory Query” on page 266 for more information about this field.
15. Select Verify to verify the server configuration is correct.
Note
This option is only configurable when used in conjunction with ShoreTel Connect.