User`s guide

Installing the ShoreTel Mobility Client Application
Provisioning the Device
1
1-6 ShoreTel Mobility User’s Guide Version 6.0
1.4 Provisioning the Device
IMPORTANT Verify the device has a data connection prior to proceeding.
1 From the Home screen, select ShoreTel.
2 Read and Accept the Emergency Call Warning page to continue. If you do not accept the
Emergency Call Warning, the ShoreTel Mobility Client exits without provisioning.
3 In the Mobility Router Address field, type the IP address or the Fully Qualified Domain
Name (FQDN) of the ShoreTel Mobility Router on the enterprise network. An example of an
IP address is 10.1.2.3, and an example of an FQDN is server1.example.com.
4 Enter your Username. This username is typically the one you use to log in to your enterprise
network. If your system administrator has created a local user account for you on the
Mobility Router, use that username.
5 In the User Password field, type the password for your user account. If you entered your
enterprise username, enter the password you use to log in to the enterprise network. If you
entered a local username, enter the password for that user account. Contact your system
administrator for the password for the local user account.
6 If connected to your enterprise local Wi-Fi network, select OK to proceed to the next step.
A If not connected to your enterprise local Wi-Fi network, select Remote Provisioning ON
and OK.
B Enter the public IP address and port number of the Mobility Router and select OK.
7 You may provision up to 5 devices (per user), and is based on the number of devices
configured on the Mobility Router. Check with your Sys Admin if there is a conflict. The
Primary Device is the device that is used to determine your location. For example, this
device is typically the device you carry, hence determining if you are in the office, on the
road, available, away, etc. All of your devices may be used to make or receive calls, instant
messages, etc.
Select Add as a new device or if reprovisioning, Replace an existing device from the list of
earlier provisioned devices. If more than one of your devices is provisioned against this
Mobility Router, a list of your devices displays, with the Primary Device listed first during
provisioning.
If you want to make this device the Primary Device, select Ye s . The default is No. Select
Next to continue.
The Provisioning screen displays. This process may take a few seconds.
The Mobile Number is automatically filled in. Enterprise Extension and Enterprise Full
Number fields are populated from the ShoreTel Mobility Router.
8 Select OK. The download, installation, and provisioning processes are now complete.
9 Select ShoreTel from the Home screen or the applications screen to launch the application.
NOTE By default, the application uses any available Wi-Fi connection. To change this
default and specify a network, see “Changing Network Settings” on page 7-3.