Specifications

Dialing Plan
Planning and Installation Guide 6 – 5
Figure 6-2 Site Edit Page
NOTE
The Local Area Code and Additional Local Area Codes set on the Site edit page
have nothing to do with the Local Area Code, Additional Local Area Codes,
and Nearby area codes on the Trunk Group edit page. Area codes on the Site
edit page relate only to digit collection, whereas those on the Trunk Group edit
page relate only to Network Call Routing and Digit Manipulation.
To define 7-digit dialing:
Step 1 Open the Site edit page in ShoreWare Director.
Step 2 Enter the 3-digit area code in the Local Area Code field.
See the ShoreTel 6 Administration Guide for more information about the
Site edit page.
Configuring 10-Digit Local Dialing
If the site is in a location with overlay area codes, it can be configured to support 10-
digit dialing for all the local area codes. The Additional Local Area Codes field on the
Site edit page defines the area codes for 10-digit dialing. When a user dials an access
code followed by a local area code, the system collects 7 additional digits (10 digits
total) before stopping digit collection. The switching software then converts the 10-
digit number into canonical format before checking call permissions and doing
network call routing.