Specifications

Session Initiated Protocol
F – 12 ShoreTel, Inc.
Create a SIP Trunk
To create a new SIP trunk, follow the procedure below:
Step 1 Launch ShoreWare Director and enter the user ID and password.
Step 2 Click on the Administration link to expand the list (if it has not
already been expanded).
Step 3 Click on the Trunks link to expand the list (if it has not already been
expanded).
Step 4 Click on the Individual Trunks link.
Step 5 In the Add new trunk at site drop-down menu, select the location
where the new SIP trunk will be added. In the in trunk group drop-
down menu, select the name of the trunk group that you created in the
previous task above.
Step 6 Click Go to display a window similar to the one shown below.
Figure F-4 Creating a SIP trunk
Step 7
Enter a name for the trunk in the Name field.
Step 8 Click on the Switch drop-down menu and select the switch that the
new trunk will be associated with.
Step 9 Select the desired SIP Trunk Type radio button. There are two choices:
• Dynamic - Select this radio button to provide more flexibility than a
static IP address. Note that all inbound calls will be accepted,
regardless of their IP address. If this is selected, you should use the
authentication methods available to prevent unauthorized callers
from accessing the system.