Specifications

Session Initiated Protocol
Planning and Installation Guide F – 7
Figure F-1 Configuring switch for SIP
Step 7
Enter a name for the switch in the Name field.
Step 8 Enter a description for the switch in the Description field.
Step 9 Click the Find Switches button next to the IP Address field and select
the appropriate switch to populate the field with an IP address.
Step 10 The Ethernet Address field auto-populates.
Step 11 Click on the Server to Manage drop-down menu and select the server
that will manage this switch.
Step 12 Enter a CESID value in the Caller's Emergency Service Identification
(CESID) field. (optional)
Step 13 Select the SIP Trunks check box to the right of the port(s) that will be
associated with a SIP trunk. Each port supports five SIP trunks.
NOTE The fax redirect feature will not work with calls that come in on SIP trunks.