Specifications

IP Phone Configuration
C – 4 ShoreTel, Inc.
ShoreTel Server's address as the telephone's boot server. The settings configured in the
telephones must match that of the DHCP server.
When DHCP is not used to configure the telephone's boot server as the ShoreTel server,
set the options described in Table C-3 using the telephone's Server Menu.
Table C-3 Server Menu Options
Manually Configuring the ShorePhone-IP110/210/212k/
230/530/560/560g and BB24
If you are not using a DHCP server to provide the IP address and configuration
parameters to the phone, you need to manually set configuration parameters on the
phone.
You can enter the phone configuration menu at bootup or by entering a key sequence
from the phone’s keypad.
To manually configure the ShorePhone-IP110/210/212k/230/530/560/560g or BB24
at bootup:
Step 1 Connect the Ethernet cable into the data jack on the back of the IP
phone or BB24 device.
Step 2 At the Password prompt, enter the default password 1234, or the
password provided by your system administrator, followed by the # key.
Option Name Value Description
Server Type FTP, Trivial FTP When set to FTP, the IP phone uses the File Transfer
Protocol (FTP) to obtain configuration and
application files at boot time.
When set to Trivial FTP, the IP phone uses the Trivial
File Transfer Protocol to obtain configuration and
application files at boot time.
To configure the phone to use the ShoreTel server as
it's boot server, the Server Type is configured to FTP.
Server Address Dotted-decimal IP
address
This is the boot server used in any of the following
situations:
• If the DHCP client is disabled
• If the DHCP server does not send a boot server
address.
•If the Boot Server parameter is set to Static.
To configure the phone to use the ShoreTel server as
its boot server, the Server Address is configured as the
name or IP address of the ShoreTel server.
FTP User Any string When the Server Type parameter is set to FTP, this is
the user name used when the IP phone logs in to the
ShoreTel server. The default is anonymous.
To configure the phone to use the ShoreTel server as
its boot server, the FTP User setting must be
configured to “ftp.”
FTP Password Any string When the Server Type parameter is set to FTP, this is
the password used when the IP phone logs in to the
ShoreTel server. The default password is ftp.
To configure the phone to use the ShoreTel server as
its boot server, the FTP Password should be
configured to “ShoreTel.”