Specifications

Server Installation
Planning and Installation Guide 17 – 15
Step 8
When the wizard is done (Figure 17-20Figure 17-9)Figure 17-9, click
Finish.
Figure 17-20 Completed
Step 9
The InstallShield Wizard will request that you restart the server (Figure
17-21). Click Yes.
Figure 17-21 Restart
At this point, you have finished installing the distributed ShoreWare
server software. When the server restarts, all the necessary software
will automatically start. It will typically take about 30 to 60 seconds
after the operating system is up and running for the Microsoft Internet
Information Services (IIS) and ShoreWare voice services to be running.
Step 10 Log in to ShoreWare Director. You will be brought to QuickLook. You
should confirm that all the ShoreWare services are running on the
distributed server.
Notes About Upgrading Software on the Distributed Server
If you are upgrading your distributed ShoreWare server, follow the same process as for
installing new software. Setup will automatically determine that an upgrade is in
process, and you will be presented with a subset of the installation wizard screens.
(There is no need to change the destination folders of the ShoreWare files.)