Specifications

Legacy Integration
Planning and Installation Guide 14 – 29
Administration and Configuration
Tie Trunk Configuration
The following summary describes the administration and configuration of the digital
trunk for connecting the ShoreTel 6.1 system to the legacy system.
Services Summary
Before starting, a summary of the required configuration should be made based on the
required services in the interface.
Desired Service Required Configuration
Extension-to-Extension Calling Enable inbound services on the trunk.
Direct inbound calls using extension routing to the ShoreTel 6.1
extensions.
Enable off system extensions.
Define the off system extension range to match extensions on the
remote PBX.
Inbound Trunks on Remote PBX Enable inbound services on the trunk.
Direct inbound calls using extension routing to the ShoreTel 6.1
extensions.
Outbound trunks on the remote PBX enable outbound services on
the trunk.
Configure any required access code for the trunk and the local area
code for the trunks connected to the remote PBX.
Configure the desired trunk services such as local, long distance,
and so on.
Configure the dialing format and any required digit sequences that
are to be pre-pended to the dialed numbers.
Note Users must have access rights to the trunk group to use the
trunk for outbound calls.
Consolidated Long Distance Enable outbound services on the trunk.
Configure any required access code for the trunk and the local area
code for the trunks connected to the remote PBX.
Configure the desired trunk services such as long distance,
international, and so on.
Configure the dialing format and any required digit sequences that
are to be pre-pended to the dialed numbers.
Note Users must have access rights to the trunk group to use the
trunk for outbound calls.