Specifications

Legacy Integration
Planning and Installation Guide 14 – 21
Figure 14-7 Creating a trunk line
Step 5
In the Number field, enter the Logical Terminal Number. This value
can range from 1 to 9999. For many systems the extension number of
the port is used.
NOTE The Logical Terminal Number identifies the port the PBX will
use to send the call to the ShoreTel voice mail system. It is very
important that the LTN match what the PBX will send. You must check
with your PBX vendor to determine what will be sent.
Step 6 Click the Save button to store your changes.
Configuring the ShoreTel Server for SMDI
After creating the trunk lines, you will configure the ShoreTel voice mail server.
Configuration involves setting up the various SMDI parameters.
To configure the ShoreTel voice mail server for SMDI operations, follow the procedure
below:
Step 1 With ShoreWare Director still open, click on the Application Servers
link.
Step 2 Click on the name of the server (Headquarters or Remote) that will be
acting as the voice mail server for the legacy PBX.
Step 3 In the Simplified Message Desk Interface section of the Application
Servers window, click on the drop-down menu and select ShoreTel
Voice Mail. A new set of fields and menus related to SMDI appear.