Specifications

Legacy Integration
14 – 16 ShoreTel, Inc.
Figure 14-4 Leave Original Digits blank to add a digit to all legacy extensions
Next, you must select the digit translation mapping that you just created at the server.
Step 8 Click on the Application Servers link and click on the name of the
ShoreTel server that will be handling the digit translation.
Step 9 In the Simplified Message Desk Interface section of the Application
Servers window, select ShoreTel Voice Mail from the Mode drop-down
menu.
Step 10 The Translation Table drop-down menu appears. Click on the arrow-
button and select the name of the digit translation table that you just
created.
Step 11 Select the Use for Call Data check box and Use for MWI Data check
box by placing a check mark in each one (as shown below). Doing so
allows for the digit translation to occur when:
• Data about a call is transferred between the legacy and ShoreTel systems.
• Message Waiting Indicator information is transferred between the two systems to
notify the legacy PBX that a message was left on the ShoreTel voice mail.
Step 12 By default, the "Use Flash to Route Calls" check box is enabled. Leave
this as is. Note that this check box only appears when "ShoreTel Voice
Mail" is selected in the Mode drop-down menu in the Simplified
Message Desk Interface section of the window. If selected, calls sent to
the ShoreTel Auto Attendant from the SMDI trunk group are