Specifications

Legacy Integration
Planning and Installation Guide 14 – 13
a specific voice mail system and must be set to the value the voice
mail system expects. In configurations where a number of SMDI
links are daisy chained together, this value is used to allow each
system to known what data belongs to it. Since most systems use
only one SMDI link, this parameter is normally set to 1.
d In the Number of Digits field, enter the extension length. (range 2-
32 digits). This value is used to determine how many digits the
ShoreTel 6.1 system sends in SMDI extension fields. This value
needs to be set to the value the voice mail system expects. The most
common values are either 7 or 10. If the system extension length is
less than the number of SMDI digits then the extension number
will be padded. For example, if the ShoreTel 6.1 system needs to
send extension 456 and the number of SMDI digits is set to 7,
extension 0000456 is sent. If no padding is desired, the number of
digits should be set to 2. In the above example with the number of
SMDI digits set to 2 only 456 will be sent.
e In the Translation Table field, select a translation table. Translation
tables are created in ShoreWare Director. If you are using a
translation table, make sure the Use for Call Data and Use for
MWI Data check boxes are selected. For more information on
building translation tables, see the ShoreTel 6 Administration Guide.
f Click Save.