Specifications

Site Requirements and Preparation
13 – 10 ShoreTel, Inc.
ShoreGear-40/8 Connectors
The ShoreGear-40/8 voice switch (Figure 13-6) contains the following components:
• 1 3.5 mm stereo connector for audio input (music on hold)
• 1 3.5 mm stereo connector for audio output (overhead paging and night bell)
• 1 DB-9 female connector for maintenance
• 2 RJ-45 connectors for the LAN interface
• 1 RJ-11 connector for connecting an analog phone (extension 5)
• 1 RJ-21X male connector for mass termination of the telephone/trunk ports
Figure 13-6 ShoreGear-40/8 Connectors and LEDs
ShoreGear-T1 Connectors
The ShoreGear-T1 voice switches (Figure 13-7) contain the following components:
• 1 DB-9 female connector for maintenance
• 2 RJ-45 connectors for the LAN interface
• 1 RJ-48C connector for T1 monitoring
• 1 RJ-48C connector for the T1 interface
NOTE The ShoreGear-T1 provides an internal Channel Service Unit (CSU).
Figure 13-7 ShoreGear-T1 Connectors and LEDs
Port LEDs
Audio Output Port
(paging/night bell)
Trunk/Telephone Ports
(RJ-21X male)
LAN1 Port (RJ-45)
Power LED
Maintenance Port
(DB-9 Female)
Power Fail
Transfer
LAN2 Port (RJ-45)
Audio In
Analog Phone RJ-11
Maintenance Port
(DB-9 Female)
LAN2 port LAN1 port
(RJ-45)
T1 port (RJ-48C)
T1 Monitor
port
(RJ-48C)
LAN LEDs
T1 LEDs
Power LED