Specifications

Site Requirements and Preparation
Planning and Installation Guide 13 – 9
ShoreGear-120/24 Connectors
The ShoreGear-120/24 voice switch (Figure 13-4) contains the following components:
• 1 3.5 mm stereo connector for audio input (music on hold)
• 1 3.5 mm stereo connector for audio output (overhead paging and night bell)
• 1 DB-9 female connector for maintenance
• 2 RJ-45 connectors for the LAN interface
• 1 RJ-11 connector for connecting an analog phone (extension 9)
• 1 RJ-21X male connector for mass termination of the telephone/trunk ports
Figure 13-4 ShoreGear-120/24 Connectors and LEDs
ShoreGear-60/12 Connectors
The ShoreGear-60/12 voice switch (Figure 13-5)contains the following components:
• 1 3.5 mm stereo connector for audio input (music on hold)
• 1 3.5 mm stereo connector for audio output (overhead paging and night bell)
• 1 DB-9 female connector for maintenance
• 2 RJ-45 connectors for the LAN interface
• 1 RJ-11 connector for connecting an analog phone (extension 9)
• 1 RJ-21X male connector for mass termination of the telephone/trunk ports
Figure 13-5 The ShoreGear-60/12 Connectors and LEDs
Port LEDs
Audio Output Port
(paging/night bell)
Trunk/Telephone Ports
(RJ-21X male)
LAN1 Port (RJ-45)
Power LED
Maintenance Port
(DB-9 Female)
Power Fail
Transfer
LAN2 Port (RJ-45)
Audio In
Analog Phone RJ-11
Port LEDs
Audio Output Port
(paging/night bell)
Trunk/Telephone Ports
(RJ-21X male)
LAN1 Port (RJ-45)
Power LED
Maintenance Port
(DB-9 Female)
Power Fail
Transfer
LAN2 Port (RJ-45)
Audio In
Analog Phone RJ-11