Specifications

Chapter 4: ShoreGear Switches Maintenance
ShoreTel Maintenance Guide 55
Check the model number on the back of the switch. If model is an IPBX, use
the IPBX row. If it is SG, use the SG row.
Step 6 Close the Telnet connection with the following ipbxctl command:
C:\Program Files\Shoreline Communications\ShoreWare
Server>ipbxctl -telnetoff <Switch IP Address>
4.2.2.6 Boot Flags
The boot flags allow you to alter how the switch will boot up. The hexadecimal values of
the flags and their actions are listed in Table 4-2.
You can aggregate flags to perform multiple functions by summing the hex values for the
commands. For example, the command:
Parameter Description
Flash Boot FTP Boot
24, T1/E1
SG-90/50/
220T1/220E1 24 T1/E1
SG-90/50/
220T1/
220E1
boot device A network interface or a
flash location
flash = 0 fei fei emac0
processor
number
Always 0 0 0 0 0
host name Always bootHost bootHost bootHost bootHost bootHost
file name: IPBX Path to VxWorks.sys
file for IPBX switches
/flash0/vxworks /ts24/vxworks /tst1/vxworks N/A
file name: SG Path to VxWorks.sys
file for SG switches
/flash0/
vxworks
/tsa/
vxworks
/tsa/
vxworks
/tsk/
vxworks
inet – ethernet <IP address>:<Subnet
Mask (hex)>
a
10.10.0.59:
ffff0000
10.10.0.59:
ffff0000
10.10.0.102:
ffff0000
10.10.0.102:
ffff0000
inet – backplane Not used
host inet IP address of the main
ShoreWare server
a
a. The IP addresses are examples. These must contain the correct IP addresses for your system.
10.10.0.5 10.10.0.5 10.10.0.5 10.10.0.5
gateway inet IP address of router
a
10.10.0.254 10.10.0.254 10.10.0.254 10.10.0.254
user FTP site – User name
login (typically set to
anonymous)
anonymous anonymous anonymous anonymous
ftp password
(pw) (blank =
use rsh)
FTP site – Password
(typically set to st1)
st1 st1 st1 tsk
flags See Boot Flags 0x40 0x40 0x40 0x40
target name Host name of switch
that can be set to other
values
ShorelineSwitch ShorelineSwitch ShorelineSwitch Shoretelbuild
startup script
(IPBX)
Path to bootscrp.txt file
for IPBX switches
/flash0/
bootflsh.txt
/ts24/
bootscrp.txt
/tst1/
bootscrp.txt
N/A
startup script
(SG)
Path to bootscrp.txt file
for SG-24, SG-8, SG-T1
/flash0/
bootflsh.txt
/tsa/
bootscrp.txt
/tsa/
bootscrp.txt
/tsk/
bootscrp.txt
other Set to network interface fei fei fei emac
Table 4-1 Parameter Settings for Flash Boot and FTP Boot