Specifications

Diagnostic and Troubleshooting Information Chapter 3: ShoreWare Servers
40
Step 2 Enter cfg and press Enter.
When you see the prompt
/*Local*//->, cfg is ready.
All commands are entered at the above prompt. Results are displayed in the DOS window
or in the voice mail logs.
WARNING Some cfg utility commands may damage the system if used incorrectly. Make
sure you understand the commands before you use them.
Table 3-1 summarizes the commands available through the cfg utility. Variables are shown
in italics.
Figure 3-14 TapiTest Output
Command Parameters Description Comments
call pp = phone
number
Make a call from the voice mail
application and play a prompt.
closem Close the open voice mail box.
dmask 0x 0x = mask
hex
Set voice mail debug mask in
hex.
To see a list of available flags, enter without a
parameter.
exit Leave cfg.
Table 3-1 cfg Commands