User guide

32
Enabling or Disabling Handsfree Mode
Handsfree mode is for analog telephone users who are using headsets.
NOTE IP phone users should instead choose the Auto Off-Hook Preference.
See “Changing Automatic Off Hook Preference” on page 27 for more
information.
With handsfree mode enabled, you can place or receive calls by using a
headset or the speakerphone, and you can stay off-hook and dial tone will not
be played. By default, handsfree mode is disabled. You can enable handsfree
mode by doing the following:
Step 1 Press the Options button , followed by your password
and then .
Step 2 Scroll to Handsfree Mode or press 6 on the keypad until 6.
Handsfree Mode is highlighted.
Step 3 Press the Edit soft key.
Step 4 Available options for Handsfree mode are Disabled and
Enabled. Scroll to the desired option and then press the OK
soft key (see below).
Step 5 Press the Done soft key to exit.
Options
Asterisk
indicates
that this is
the current
mode.