Specifications

SA-100 Planning, Installation and Administration Guide Chapter 6: Configuring the SA-100 for Operation
48
Step 4 Click Administration > System Parameters > Security > Port Configuration.
The Port Configuration page appears as shown in Trusted IP Range. The
Trusted IP Range page appears as shown in Figure 6-5.
Figure 6-5 Trusted IP Ranges Page.
Step 5 Select one of the default IP address ranges that you want to use or do the
following:
Step a Click the New button. The Trusted IP Range Info. dialog box appears as
shown in Figure 6-6.
Figure 6-6 Trusted IP Range Info Dialog Box
Step b In the Name field, enter the name that you want to use for this range.
Step c In the Low IP Address field, enter the lowest IP address that you want to use
for this range.
Step d In the High IP Address field, enter the highest IP address that you want to
use for this range.
Table 6-2 Port Address Ranges SA-100 Supports for DMZ
Start Stop Start Stop Start Stop Start Stop
20 — 123 — 5269 — 5455 —
21 — 443 — 5432 — 5457 —
22 — 833 — 5440 — 5461 5470
25 — 2427 — 5446 5450 5555 —
80 — 4308 — 5452 —
111 — 5060 — 5454 —