Specifications

ShoreTel 12.1 27

HAPTER

Site Requirements and Preparation

This chapter provides information about preparing your site for the SA-100 including

concerns such as physical space, environment, and cabling. This chapter includes the

following topics:

• "Recommendations" section on page 27

• "Physical Specifications" section on page 27

• "Power Cable" section on page 30

• "Ethernet Ports" section on page 30

• "Maintenance Cable" section on page 31

• "Environmental Requirements" section on page 31

4.1 Recommendations

The following recommendations will assist you in planning and preparing your site for the

ShoreTel system.

• Hire a cabling contractor to install your racks, patch panels, and cabling.

• Have two RJ-48C cables ready for each SA-100.

• Reputable surge protector or UPS

• For remote deployment, your network should have 384 kbs bandwidth or better

available between the FTP server and the remote SA-100 for downloading upgrade

software.

4.2 Physical Specifications

This section provides physical and consumption information about the SA-100. Units have

a 1U footprint and fit into a standard 19-inch mounting rack. Full-length mounting rails

are shipped in the package. Table 4-1 provide specification information about the SA-100.

Table 4-1 ShoreTel Service Appliance 100 Physical Specifications

Parameter Service Appliance 100 (SA-100)

Dimensions (H x W x D) 1.67 in (4.3 cm) (H) x 17.09 in (43.4cm) (W) x 15.5 in

(39.4 cm) (D).

Weight 17.8 lb (8.06 kg)

Input Voltage 100-240 VAC, 50-60 Hz, 4-2 A