Specifications

Windows Server 2008 Support ShoreWare Server Release Notes
Page 28
• Shoreline Communication
• FTPRoot
Refer to the Planning and Installation Guide for instructions on uninstalling
ShoreWare Server software.
NOTE: Make sure Windows PowerShell is not present. Refer to Microsoft
support for information on uninstalling Windows PowerShell.
Step 4 Upgrade the server operating system to Windows Server 2008. After the operating
system is upgraded, you must activate the operating system prior to installing
ShoreWare Server software.
Refer to Microsoft documentation and the Installation Requirements section,
starting on page 21.
NOTE: Do not use Autorun from the Windows Server 2008 CD. Autorun will
only allow a new installation of Windows 2008.
Step 5 Ensure that the Application Server Roles and Web Server Roles are configured.
Step 6 Install the ShoreWare Server software.
Refer to the Planning and Installation Guide for instructions on installing
ShoreWare Server software.
Step 7 Restore the Configuration and CDR databases.
Refer to the ShoreTel Administrator Guide for instructions on restoring a backup
copy of a ShoreWare database.
Step 8 Enable Active Directory login if you previously disabled this option.
Warning: If you did not disable Active Directory prior to upgrading to Windows
2008 and Active Directory is enabled after upgrading to Windows 2008, you will
not be able to access ShoreWare director.