Specifications

ShoreWare Server Release Notes Windows Server 2008 Support
ShoreTel 9.1 Page 27
Upgrading ShoreWare Servers from Windows 2003 to
Windows 2008
Upgrading Servers Running ShoreWare 9.1
The following procedure is required when upgrading to Windows Server 2008 on a server
that is running ShoreWare 9.1 server software.
Warning: Active Directory settings must be disabled before proceeding with the upgrade
process.If active directory is not disabled, you will not be able to start ShoreWare
Director after upgrading.
Figure 7 Upgrade Process for Servers Running ShoreWare Version 9.1
Step 1 Stop all ShoreWare services and backup the Configuration and CDR databases.
Refer to the ShoreTel Administrator Guide for instructions on backing up
ShoreWare databases.
NOTE: ShoreTel recommends that you back up these databases to a storage
device separate from the server you intend to upgrade.
Step 2 Backup the contents of the Shoreline Data folder, except the Call Records2 folder,
to an external device.
NOTE: If there are any customizations that you wish to save or need to refer to
after upgrading the ShoreWare software, be sure to backup the Inetpub folder
along with the current and local machine folders in the regedit directory. Refer to
Microsoft documentation.
Step 3 Uninstall the ShoreWare Server software and delete the following folders:
• Shoreline Data