Specifications

Mobile Call Manager – Location Based Service ShoreWare Server Release Notes
Page 162
• The Range specifies the radius of the waypoint. Valid parameter settings depend on the
language setting:
— For English US or English UK, valid settings are 100 feet and 1000 feet.
— For all other languages, valid settings are 100 meters and 1000 meters.
• The Attach to parameter specifies the parameter setting selected by MCM when it
receives a GPS signal that is located within the region defined by the waypoint.
Valid settings include all Call Handling Modes and all Office Anywhere numbers. The
setting is activated when the device receives a GPS signal at the location specified by
the waypoint.
LBS Indicators
MCM panels displays LBS icons that indicate activity and GPS reception. The Main Menu
also displays LBS rule implementation status.
LBS Activity status
MCM panels displays a satellite dish icon in the top right corner when LBS is enabled, as
shown in Figure 84.
GPS Reception Status
The GPS Reception Status icon appears as an appendage of the LBS Activity icon. The
following icons denote reception results of the last polling attempt:
• green circle: indicates that coordinates from the most recently received GPS signal
matched a waypoint.
The icon in Figure 84 contains the green circle.
• empty circle: indicates that coordinates from the most recently received GPS signal did
not match a waypoint.
• dish (rotating): indicates MCM is searching for a GPS signal.
• no icon: indicates the device is not configured for LBS.
• E (three red bars): indicates a GPS or LBS error condition.
LBS Implementation Status
When the current Office Anywhere or Call Handling Mode is set because a waypoint
matched a GPS signal, a satellite icon appears next to the setting. In Figure 84, the satellite
icon appears next to the In a Meeting indicator at the bottom of the panel.
Figure 84 Indication Icons