Specifications

ShoreWare Server Release Notes Mobile Call Manager – Location Based Service
ShoreTel 9.1 Page 159
• The CHM setting remains unchanged.
Manual CHM or OA setting changes have higher priority than GPS generated settings.
Manual settings remain in effect until the next GPS poll that meets the following criteria:
• LBS and waypoint are re-initiated.
• The new LBS coordinate either maps to a new waypoint or does not map to a waypoint.
If the coordinate does not match a known waypoint, the default Office Anywhere
extension is used.
Availability
MCM supports LBS features on the following devices (depending on carrier support):
• BB 9000 series
• BB 8300 series (requires a GPS dongle)
• BB 8800 series
• Nokia N95
• Nokia E90
• Nokia E61i
Devices supporting LBS must either have internal GPS hardware or the capability of
connecting to an external device that provides GPS functionality such as dongles. The
carrier must allow GPS on the device and allow third party applications, such as MCM, to
use GPS functionality. External GPS devices may be used to enable LBS features on these
devices, depending on carrier limitations.
Configuring LBS
LBS parameters are configured on the Location-based Services panel, as shown in Figure
79. To open the Location-based Services panel, select Settings -> Location-based Services
from the Main Menu.
Managing Location Based Services Activity
The Enable Location-based Services parameter, located at the top of the panel, controls
activation of Location-Based Services. The checkbox located left of the text indicates the
status; when the box is filled, Location-Based Services is enabled.
The parameter is a toggle setting – the LBS is enabled and disabled through the same
procedure.
To change the Location Based Services activity:
Step 1 Select Enable Location-based Services with the cursor.
Figure 79 Location-based Services