Specifications

SIP Trunk Profiles ShoreWare Server Release Notes
Page 102
• User Agent: This parameter is the expression ShoreWare uses to identify devices
covered by the profile. ShoreWare compares this expression to the User Agent field in
the header of SIP packets handled by the system.
• Priority: This parameter determines the order by which the profiles are evaluated
against the SIP packet header. Profiles with larger priority values are evaluated before
profiles with smaller priority values.
The each profile in the User Agent field is compared to the User-Agent field of the SIP
packet header until a match is found. The profile containing the matching User-Agent
field is then used to specify device configuration settings.
• Enable: This parameter lists the status of the profile. ShoreWare uses only profiles that
are enabled when evaluating the characteristic set of a device.
• System Parameters: This field lists the device characteristics and default settings.
• Custom Parameters: This field lists additional device settings or overwrite default
settings listed in the System Parameters field. Supported parameters include:
— DontFwdREFER: When enabled, packets are inhibited from sending REFER
messages.
Implementation
To view the available SIP Trunk Profiles, access the SIP Trunk Profile List, as shown in
Figure 42, select Administration -> Trunks -> SIP Profiles from the Director Main Menu.
To view a SIP Trunk profile, open the Edit SIP Trunk Profile panel, as shown in Figure 43,
click the name of the desired profile in the SIP Trunk Profile List.
To create a new SIP Trunk profile, open the Edit SIP Trunk Profile panel, as shown in
Figure 43, press the New button in the upper left corner of the SIP Trunk Profiles list.
To implement a SIP Trunk profile into the definition of a SIP Trunk Group, perform the
following:
Step 1 Open the Trunk Groups List by selecting Administration -> Trunks -> SIP Profiles
from the Director Main Menu.
Step 2 Open the desired trunk group by clicking the name of the group.
Step 3 Select a profile from the Profile drop down list, as shown in Figure 44.
Figure 42 SIP Trunk Profile List