User guide

12 Handset User Guide ShoreTel IP Phone 930D
Getting Started Attaching the Belt Clip (Optional)
1
7. Place the handset in the charging stand with the display facing forward.
The display on the handset light ups and the blue charging LED turns on.
When using the battery for the first time, it is necessary to leave the handset in the charging stand
for at least 10 hours before the handset is ready for use.
Before you can use the handset, it must be registered with the system. Contact your system
administrator if your handset displays “Searching,” “Deregistered,” or “No Service.”
Attaching the Belt Clip (Optional)
Line up the holes on each side of the handset with the clip opening facing down. Press down on the
clip until it locks into place.
Plugging in a Headset (Optional)
You can plug a wired headset into the 2.5mm jack on the side of the handset, as shown in the
illustration below.
The Panasonic KX-TCA60 Hands-Free Headset is recommended for use with the IP930D handset
(headset not included).
Note
Do not place the handset or charger in direct sunlight. The battery has a built-in heat sensor that will
stop charging if the battery temperature is too high.
Note
If you plan to use a headset to handle most of your calls, you might want to set your default audio path
to be for a headset. See Changing Automatic Off Hook Preference on page 36.