Installation guide

IP8000 Conference Phone Application Note—Page 7
The next item to change for the SIP trunk groups is the outbound trunk conguration (Figure 11).
Figure 11 – Outbound Trunk Conguration
For the Outbound Trunk Conguration set the “Access
Code” and “Local Area Code” elds for the system. For the
“Trunk Services” boxes, typically none of these will be
selected, except for “Caller ID not blocked by default”, if
not enabled the IP8000 will not receive Caller ID information
when calls are sent via this trunk group.
Note: Remember, these are calls being sent from the
ShoreTel system to the conference phone.
After these settings are made press the “Save” button to
input the changes.