Installation guide
IP8000 Conference Phone Application Note—Page 12
Figure 20 – Preferences/Appearance Screen
General Configuration
The following conguration steps are not mandatory but are highly recommended.
Navigate to the Preferences/Appearance section of the menu as shown in Figure 20 and apply the following settings:
Set the System Name to a string of your choice e.g. the name of the conference room in which the phone is deployed.1.
Set the Phone number setting to the assigned extension for the phone. This information appears on the Idle display of the 2.
device. This should also be a number (extension) that was dened in the Off System Extension range in the trunk group.
Click on the “Save Changes” button to apply these settings.3.