Install guide

5
2a Connect to powered network
Share a single LAN wall jack
between your IP phone and
computer by daisy-chaining the PC
off the second Ethernet port on
your phone. (The phone connects
to the wall jack and the PC
connects to the phone.)
Connect the network
cable between the
LAN port on the back
of the phone and an
Ethernet jack in the
workspace (or on a
data switch/router that
supports Power-over-
Ethernet).
(no AC adapter required)
optional
If the LAN to which this phone will be connected supports power-over-Ethernet,
no AC adapter is needed. The phone draws power from the Ethernet network.
Note: Power can be provided to the
ShoreTel 560 IP phone by daisy-chaining
t
he phone from a ShoreTel BB24 button
box device (which has power-forwarding
capabilities). However, the 560g (gigabit)
model requires more power than the other
ShoreTel models and is not compatible
w
ith the BB24.