Specifications

ShoreTel Voice Switches VxWorks® Command Line Interface
3
ShoreTel 14 Maintenance Guide 83
set_mpm_debug (char *) Used to print information
regarding commands/event
interface between host CPU
and DSPs.
Uses string as the parameter.
Valid parameters include
“pots”, “pstn”, “dtmfd”,
“dtmfg”, “cdis”, “class”, “cpm”
Example:
To print POTS related
information, enter
set_mpm_debug(“pots”)
sip_debug_level –1 Logs ShoreSIP to SIP
translation.
sip_debug_level –4 Logs SIP messages also.
sipuaCallList Displays active SIP stack
calls. sipuaCallList 2 dumps
more call related information.
Run on switches hosting
SIP trunks/extensions.
sipuaList Displays list of SIP trunk/
extension user agents.
Run on switches hosting
SIP trunks/extensions.
t2t_debug_level Logs trunk interval
information like silence, trunk
name, trunk state, etc.
tcpstatShow Displays TCP statistics. X
trans_debug Logs ShoreSIP transactions.
traceroute "<IP
Address>"
For troubleshooting network
by mapping route packets
use to traverse an IP network.
X Remember to include
double quotes (“)
around the target IP
address.
(For details, see
Running the Traceroute
Command from the
ShoreTel Voice Switch
CLI on page 86.)
trunk_cco_status Displays information about
switch's trunk CCOs.
trunk_debug_level Sets the trunk debugging flag Recommend using level
4.
uaCallList Displays information about
active calls and legs.
ua_call_status Shows a snapshot of the
active call status of the
switch.
Table 11: VxWorks
®
CLI Commands
Command Description
Available on
Voicemail-Enabled
Switches
Notes