Specifications

ShoreTel Voice Switches VxWorks® Command Line Interface
3
ShoreTel 14 Maintenance Guide 81
lspTelList 2 Displays detailed information
about remote contacts.
mae_debug_level Logs BCA call flow
information.
mailbox_debug_level Logs mail box destination for
a particular call.
memShow Shows current memory
usage of the switch.
X
mgcp_msg_debug Logs MGCP messages.
mgcp_trans_debug Logs MGCP transactions.
mohc_debug_level Prints diagnostic information
for music on hold calls when
set to 1.
Can be set to either 0 or
1. Default is 0.
mpm_debug_mask – 0x40 Sets mpm debug flag to
output Caller ID information
received on inbound calls.
mpm_debug_mask – 0x10 Displays detailed DTMF
information.
mpm_debug_mask – -1 Displays detailed mpm
information. Full debug of
inbound calls (CallerID,
DTMF).
mscmd_verbose Prints diagnostic information
for the media commands sent
from Switch board layer when
set to 1.
Default is 0.
Main media command
verbose variable.
msps Displays media stream
statistics for all active calls on
the switch.
Use for all media-related
issues.
msps 7 Displays media stream
statistics for active calls.
msps 8 Displays media stream
statistics.
Use only as directed by
ShoreTel Support.
msps 16 Displays media stream
statistics.
Use only as directed by
ShoreTel Technical
Support.
Table 11: VxWorks
®
CLI Commands
Command Description
Available on
Voicemail-Enabled
Switches
Notes