Specifications

ShoreTel Voice Switches VxWorks® Command Line Interface
3
ShoreTel 14 Maintenance Guide 80
ipdt_dumpExtCK Dumps information for call
keys on the extension.
Useful for
troubleshooting LED
patterns and icon
issues.
ipdt_resetExtDisplay Redisplay on the extension. If
the phone display and IPDT
display
(ipdt_dumpExtDisplay) are
desynchronized, run
ipdt_reset_ExtDisplay to
synchronize them.
ipdt_restrictTraceExts Set ipdt_debug_filter to 1.
Then, use
ipdt_restrictTraceExts to turn
on logging on a particular
extension.
ifShow Displays the current
configured network
parameters.
X
laa_debug_level Logs backup auto attendant
signal flow.
lspConList Displays switch connectivity
to other switches.
lsp_debug_level Displays Location Service
Protocol messages that are
exchanged between
switches.
Recommend using level
4.
lsp_ping Tests the LSP UDP
communication to the far end
switch. Parameters include IP
address and test iterations.
example:
-> lsp_ping
"192.168.1.1", 100
Sends 100 packets to
the switch at
192.168.1.1 (nominally
1 second). If command
lists only the IP address,
1000 packets (10
seconds) are sent.
lspTelList Displays local and remote
contacts.
lspTelList 1 Displays detailed information
about local contacts.
Table 11: VxWorks
®
CLI Commands
Command Description
Available on
Voicemail-Enabled
Switches
Notes