Specifications

ShoreTel Voice Switches VxWorks® Command Line Interface
3
ShoreTel 14 Maintenance Guide 77
dn_plan_status Displays information about
the switch's dial plan.
dnp_debug_level Displays detail information
(digit by digit) about dial plan
access.
Recommend using level
1.
dtmf_debug Displays RFC2833 for G729
related events. Settings are
variable, so contact ShoreTel
TAC at [phone] for
assistance.
DumpSB Displays maximum PMCSW
outputs.
dumpUsedBw Displays information about
actual bandwidth used on
individual calls/legs.
etherMonBroadcast Set command value to 1 to
include broadcast network
packets in packet capturing.
X Default value 0 does not
capture/broadcast
network packets.
etherMonDump Writes the ethernet trace
information captured when
using EtherMonStart. Writes
to a .cap file in
\inetpub\ftproot directory of
the ShoreTel server
controlling the switch. The
.cap file name is ST-<lst 3
bytes of MAC-time-
date>.cap.
X
etherMonStart <bytes> Bytes is the number of bytes
of information you want to
capture (for example,
10000000). Recommended
values are between 1000000
and 3000000. Captures
ethernet packets for trace
purposes.
X Requires excessive
switch memory. Use
memShow to determine
memory available for
command.
etherMonStop Stops capturing ethernet
packets.
eval_adm_var Displays information about
switch's own bandwidth
usage.
Table 11: VxWorks
®
CLI Commands
Command Description
Available on
Voicemail-Enabled
Switches
Notes