Specifications

ShoreTel Voice Switches Using a Telnet Session to Set IP Address and Boot Parameters
3
ShoreTel 14 Maintenance Guide 70
Table 7: Parameter Settings for Flash Boot and FTP Boot
Parameter Description
Flash Boot FTP Boot
24, T1/E1
SG-90/50/
220t1/220E1
24 T1E1
SG-30/50/90/
220TI/220TIA/
220E1
boot device A network
interface or a
flash location
flash = 0 fei fei emac0
processor
number
Always 0 0 0 0 0
host name Always
bootHost
bootHost bootHost bootHost bootHost
file name: SG Path to
VxWorks.sys
file for SG
switches
/flash0/
vxworks
/tsa/
vxworks
/tsa/
vxworks
/tsk/
vxworks
inet – ethernet <IP
address>:<Sub
net Mask
(hex)>
a
10.10.0.59:ffff000
0
10.10.0.59:ffff000
0
10.10.0.102:ffff00
00
10.10.0.102:ffff00
00
inet –
backplane
Not used
host inet IP address of
the main
ShoreTel
server
a
10.10.0.5 10.10.0.5 10.10.0.5 10.10.0.5
gateway inet IP address of
router
a
10.10.0.254 10.10.0.254 10.10.0.254 10.10.0.254
user FTP site –
User name
login (typically
set to
anonymous)
anonymous anonymous anonymous anonymous
ftp password
(pw) (blank –
use rsh)
FTP site –
Password
(typically set to
st1)
st1st1st1tsk
flags See Boot Flags 0x40 0x40 0x40 0x40
target name Host name of
switch that can
be set to other
values
ShorelineSwitch ShorelineSwitch ShorelineSwitch Shoretelbuild