Specifications

ShoreTel Voice Switches Router Auto-Delete Properties for ICMP Redirects
3
ShoreTel 14 Maintenance Guide 68
In order to Telnet to the SoftSwitch, the Telnet port must be set to 2323. The standard Telnet port is
23.
4. Press ENTER.
No User ID or Password is required. This immediately logs you into the SoftSwitch.
5. Press ENTER a second time to get the SoftSwitch prompt, which looks like the following:
????
SHELL: ????
SHELL:
6. Enter CLI commands as described in VxWorks® Command Line Interface on page 75.
7. End the SoftSwitch Telnet session by typing x.
8. Press ENTER.
9. Remove the “Telnet Enabled” DWORD from the registry editor by right-clicking on it and selecting
Delete.
To start a Telnet session to the SoftSwitch from a different computer, you must specify the IP address
of the ShoreTel server and modify the Telnet port to 2323.
All switch commands are available in the SoftSwitch with the exception of the following:
 Any VxWorks-specific commands
 msps
Router Auto-Delete Properties for ICMP Redirects
When WAN links fail, ICMP redirect messages are received by the ShoreTel Voice Switches from
routers on the network. These ICMP redirect messages notify hosts on the network (such as ShoreTel
Voice Switches) that an alternate route is available, and the switch updates its routing table
accordingly.
The default behavior for ShoreTel Voice Switches is to automatically delete any ICMP redirect
messages three minutes after time of receipt.
You can shorten or lengthen this period of time in one-minute increments, or you can disable the
automatic deletion of ICMP redirect messages altogether.
Modifying the Time Period for the Automatic Deletion of ICMP Redirect
Messages
1. Create the following DWORD entry in
HKEY_LOCAL_MACHINE\SOFTWARE\ShorelineTeleworks\
TelephonyManagementServer\Settings: