Specifications

ShoreTel Voice Switches IP Address from DHCP
3
ShoreTel 14 Maintenance Guide 66
To select an option in ShoreTel Voice Switch CLI, enter the number associated with the menu item and
press ENTER. To change or set a parameter, select the item you wish to change, then type the
parameter number and press Enter.
Boot and IP Configuration Options
When you choose Change System Configuration from the CLI main menu, a menu of boot and IP
configuration options appears.
Tab l e 6 on page 66 describes the boot and IP configuration options.
Table 5: Commands in CLI Main Menu
Command Description Notes
0 Exit Exit from CLI of voicemail-enabled
switch and go to the Linux shell.
1 Show version Lists version numbers for firmware and
boot ROM in addition to the base
version and the CPU board version.
2 Show system configuration Displays the switch’s boot and IP
configuration.
3 Change system configuration Takes you to the system configuration
menu where you can set a switch’s boot
and IP configuration.
4 Reboot Reboots the switch
5 Shutdown Shutdown the voicemail-enabled switch
and be ready to power-off.
6 Archive Logs Archive log files in /cf/shorelinedata/
Logs directory and core files in /cf/core
directory and save the archive file in /
inetpub/ftproot directory in the server.
? Help Enter a ? to print this menu.
Table 6: Boot and IP Configuration Options
Command Switch Description Voicemail-Enabled Switch Description
0 Return to previous menu Return to previous menu
1 Change IP address Change IP address
2 Change IP subnet mask Change IP subnet mask
3 Change the gateway IP address Change the gateway IP address
4 Change server IP address:
Note: This is the IP address the ShoreTel
server with the FTP service for the
switch.
Change server IP address:
Note: This is the IP address the ShoreTel
server with the FTP service for the switch.