Specifications

DCOM Permissions TMSManager2 properties
C
ShoreTel 14 Maintenance Guide 287
Return to the KadotaUtil Properties window by clicking OK.
6. Open the Identity panel, and select The system account (services only).
TMSManager2 properties
1. Open the TMSManager2 Properties window by selecting MMC > Component Services >
Computers > My Computer > DCOM Config > TMSManager2 > Properties.
2. Open the General panel, and set Authentication level to Default.
3. Open the Location panel, and select Run application on this computer.
4. Open the Security panel, and click Edit in the Launch and Activation Permissions section.
Select the following permissions:

Administrators: Local Launch – no selection; Remote Launch – no selection; Local Activation
– allow; Remote Activation – allow

SYSTEM: Local Launch – no selection; Remote Launch – no selection; Local Activation –
allow; Remote Activation – allow
Return to the TMSManager2 Properties window by clicking OK.
a. Click Edit in the Configuration Permissions section, and select the following permissions:

Administrators: Full Control – allow; Read – allow

CREATOR OWNER: Full Control – no selection; Read – no selection

SYSTEM GROUP: Full Control – allow; Read – allow

other Users: Full Control – no selection; Read – allow
b. Return to the TMSManager2 Properties window by clicking OK.
c. Open the Identity panel, and select The system account (services only).
ZinManager Properties
1. Open the ZinManager Properties window by selecting MMC > Component Services >
computers > My Computer > DCOM Config > ZinManager > Properties.
2. Open the General panel, and set Authentication level to Default.
3. Open the Location panel, and select Run application on this computer.
4. Open the Security panel and complete the following steps:
a. Click Edit in the Launch and Activation Permissions section.