Specifications

DCOM Permissions TriggerServer Properties
C
ShoreTel 14 Maintenance Guide 285
Select the following permissions:

Administrators: Local Launch – allow; Remote Launch – allow
Local Activation – allow; Remote Activation – allow

INTERACTIVE: Local Launch – allow; Remote Launch – allow
Local Activation – allow; Remote Activation – allow

SYSTEM: Local Launch – allow; Remote Launch – allow
Local Activation – allow; Remote Activation – allow
TriggerServer Properties
1. Open the TriggerServer Properties window by selecting MMC > Component Services >
Computers > My Computer > DCOM Config > Trigger Server > Properties.
2. Open the General panel, and set Authentication level to Default.
3. Open the Location panel, and select Run application on this computer.
4. Open the Security panel.
a. Click Edit in the Launch and Activation Permissions section.
Select the following permissions.

Administrators: Local Launch – allow; Remote Launch – allow
Local Activation – allow; Remote Activation – allow

ANONYMOUS LOGON: Local Launch – no selection; Remote Launch – no selection;
Local Activation – allow; Remote Activation – allow

SYSTEM: Local Launch – allow; Remote Launch – allow
Local Activation – allow; Remote Activation – allow
Return to the TriggerServer Properties: Security panel by clicking OK.
b. Click Edit in the Configuration Permissions section.
Select the following permissions, as shown in:

Administrators: Full Control – allow; Read – allow

SYSTEM GROUP: Full Control – allow; Read – allow

CREATOR OWNER: Full Control – no selection; Read – no selection

other Users: Full Control – no selection; Read – allow
Return to the TriggerServer Properties window by clicking OK.
5. Open the Identity panel.
Select The system account (services only).