Specifications

Event Codes IP Phone Configuration Service (IPCS)
A
ShoreTel 14 Maintenance Guide 268
IP Phone Configuration Service (IPCS)
Tab l e 67 lists and describes event codes for IPCS.
Table 67: Event Codes: IP Phone Configuration Service (IPCS)
ID Severity Level Message Cause Action
2700 Information ShoreTel IPCS Server
started.
IPCS Server
started.
No action.
2701 Error Handler not installed. The service was
not installed
properly.
Re-install the
service.
2702 Information The ShoreTel IPCS
Server Stopped.
IPCS Server
stopped.
No action.
2703 Information Bad Service Request. The service is not
running.
Re-install the
service.
2704 Information Maximum capacity for
Switch ID: <switch
identifier> reached.
The switch reached
its maximum
capacity of IP
phones.
To support more IP
phones, configure a
new switch or add
additional IP Ports
to existing
switches.
2705 Information IP-Phone was unable to
be configured. No
switches are available on
Site: <site name> The
existing switch(es) have
reached maximum
capacity or may be
temporarily down.
Switches at the
destination site
have reached
maximum capacity
of IP phones.
To support more IP
phones, configure a
new switch or add
additional IP Ports
to existing
switches.
2706 Information IP-Phone was unable to
be configured. No IP
Phone switches are
configured on Site: <site
name>.
No switches are
configured to
support IP phones
at the destination
site.
To support more IP
phones, configure a
new switch, or add
additional IP ports
to existing
switches.