Specifications

Other IP Endpoints Configuring Syslog Functionality for the ShoreTel IP Phones
6
ShoreTel 14 Maintenance Guide 192
After the phonectl command, the user is prompted to enter a password.
After the user enters the correct password, the device permits access to executables that configure or
diagnose the respective device.
CLI passwords are configurable only through ShoreTel Director. The default password is ShoreTel.
Configuring Syslog Functionality for the ShoreTel IP Phones
Several commands are used to set up syslog functionality. These must be run before any logging
messages can be received.
SetLogLevel
The setLogLevel command (Table 37 on page 193) sets the logging severity level.
A log level remains in effect until a new setLogLevel command is issued.
Note
All commands are case-insensitive.