Specifications

Other IP Endpoints IP Phone Configuration
6
ShoreTel 14 Maintenance Guide 187
SysLogInfo Up to 32
ASCII
Characters
IP Address, module, verbose
level, facility code, and output
device of the SysLog function.
The port number may be
optionally identified and
appended to the IP address.
Note: The default of 514 is
used if no port is specified.
The module is a 32-bit integer
where each bit refers to the
debug enable/disable status
from a specific software
module. Bit assignments are
defined in “Configuring Syslog
Functionality for the ShoreTel IP
Phones.”
The verbose level indicates the
level of information that is
printed. Levels are 0 to 7.
Facility code is the syslog
facility code.
The output devices are 0 –
serial port, 1 – syslog server.
Example:
192.168.0.3:514, 279,33,1
CFG 0.0.0.0,0,0,0,0
ToneDefine Up to 64
ASCII
Characters
See the document "Custom
Rings and Tones V4" for a
definition of permissible values.
CFG “”
ToneMap Up to 64
ASCII
Characters
See the document "Custom
Rings and Tones V4" for a
definition of permissible values.
CFG “”
TouchBeep 0 or 1 If enabled, the phone plays a
beep when the touch screen is
touched for user feedback.
CFG 0
Version Up to 16
ASCII
Characters
This parameter specifies the
version identifier of the
configuration file. It is then
reported via the Mgc/gi signal
request.
CFG “”
Table 35: Phone Configuration Parameters (Continued)
Parameter Value Type Value Source Default