Specifications

Other IP Endpoints IP Phone Configuration
6
ShoreTel 14 Maintenance Guide 183
Include Up to 64
ASCII
Characters
The file name that is specified is
read and its contents included
into the master configuration
file. Files may be specified
completely, or may include the
variables $Hardware, $Country
or $Language. The value of the
Hardware Version
(programmed into flash at the
factory e.g. K01M01P01L01),
Country or Language
Parameter is substituted for
$Hardware, $Country or
$Language when the file name
is created. For example:
Include “Country_$Country.txt”
with the Country parameter set
to 3 loads in the file
“Country_3.txt”
This permits parameters to be
specified based on the Country
and Language parameter
values.
CFG “”
IPAddress Dotted
Decimal
ASCII
IP address to be used by the
telephone.
DHCP,
MAN
0.0.0.0
KeepAlive Up to 3
ASCII
Characters
Number of seconds to wait for
an audit endpoint command
before initiating the IP phone
failover.
Note: If set to zero, recovery
procedures are never started.
The valid range is 0 to 999
seconds.
CFG 120
Language Up to 3
ASCII
Characters
This parameter specifies the
Language that is used by the
Include parameter to identify a
particular file to include. The
valid range is 1 to 255.
SSON,
CFG,
MAN
1
Layer2Audio 1 ASCII
character
Layer 2 audio priority values
from 0 to 7.
CFG 5
Table 35: Phone Configuration Parameters (Continued)
Parameter Value Type Value Source Default