Specifications

Other IP Endpoints IP Phone Configuration
6
ShoreTel 14 Maintenance Guide 178
The phones support the parameters described in Table 35 on page 179.
In specifying parameters, the following rules apply:
 IP addresses from the keypad must be provided in dotted-decimal format.
 Cases are preserved in character strings unless otherwise indicated.
 Parameter checking is performed on all parameters to look for illegal values, and illegal values are
ignored.
 White space within a parameter is ignored.
The file names used for AppName, BootName, and FontPixmap, IconPixmap, WallpaperPixmap
and in include parameters may also include a path to the file. Upper and lower case characters are
ignored except when specified in the path or file name for these parameters to preserve operation with
case-sensitive FTP servers.
For the purpose of comparing the file in flash and the value on the server, only the file name and date
are used.
The abbreviations listed in Table 34 are used to identify the source of each parameter in the “Source”
column in the table.
WARNING!
The tables in the following section contain detailed information that can be used to modify the behavior
and functionality of your ShoreTel system. Make sure that you understand what you are doing before
attempting to use this information to modify your system. ShoreTel is not responsible for any damage
or expenses incurred through misuse of this information. If you have questions, contact ShoreTel
Technical Support before attempting to modify your system.
Table 34: Source File Abbreviations
Source Abbreviation in Table
DHCP ACK DHCP
DHCP Site Specific Option SSON
Configuration File CFG
Manual Entry Using SETUP MAN
MGCP Message MGCP