Specifications

Other IP Endpoints Manual Phone Configuration
6
ShoreTel 14 Maintenance Guide 171
The default Password can be changed in ShoreTel Director. For more information, see the
ShoreTel System Administration Guide.
3. Enter the values listed in Tabl e 28 when prompted. Press # to advance to the next settings or * to
exit
.
The phone downloads the latest bootROM and firmware from the ShoreTel server and in the process,
reboots several times. When the phone displays the date and time, the boot and upgrade process is
complete.
Manually Configuring a Phone from the Keypad
1. With the phone on hook, press the MUTE key followed by 73887# (SETUP#).
2. At the Password prompt, enter 1234, or the password provided by your system administrator,
followed by the # key.
3. Enter the values when prompted. Press # to advance to the next settings or * to exit.
The phone downloads the latest bootROM and firmware from the ShoreTel server and in the
process, reboots several times. When the phone displays the date and time, the boot and upgrade
process is complete.
Table 28: Boot up Configuration Prompts
Prompt Value
Clear all values? Press #. (No.)
DHCP – ON Press * and #.
IP – Enter the IP address for the phone. Press #.
Subnet – Enter the Subnet mask. Press #.
Gateway – Enter the gateway IP address. Press #.
FTP – Enter the IP address of your ShoreTel server. Press #.
MGC – Press #.
Note: The phone obtains the address from configuration files on the
ShoreTel server.
SNTP – Enter the IP address of your time server. Press #.
802.1Q Tagging – OFF Press #.
Note: Consult your network administrator before changing this value.
VLAN ID – Press #.
Save all changes Press #. (Yes.)
Note
The default IP Phone Password can be changed in ShoreTel Director. For more information, see the
ShoreTel System Administration Guide.