Specifications

Configuring and Maintaining 400-Series IP Phones Configuration Parameters
5
ShoreTel 14 Maintenance Guide 143
[power] sleepTimeout A number that indicates
minutes
Default: 60
The number of minutes
without phone activity (calls
or key presses) that elapse
before the phone transitions
to the sleep state, which
dims the backlight and
lowers power usage
depending on the settings
for the
sleepEthernetLowPower
and sleepUsbSuspend
parameters. A value of 0
means that the phone never
goes into the sleep state.
The value specified for the
sleepTimeout parameter is
in effect outside the hours
specified by the
sleepInhibitStartTime and
sleepInhibitStopTime
parameters.
CFG
[power] sleepEthernetLowPower On or off
Default: on
Whether or not the phone
reduces Ethernet power
when the phone is in a sleep
state. If off, Ethernet power
is not reduced.
CFG
[power] sleepUsbSuspend On or off
Default: on
Whether or not the phone
supplies power to USB
devices plugged into the
USB port on the phone (on
IP485g) when the phone is
in a sleep state. If off, power
to USB devices is not
suspended when the phone
is in a sleep state
CFG
[power] sleepInhibitStartTime A four-digit time on a
24-hour clock
Default: 06:00
The time of day when the
phone display goes from the
sleep state to an idle state.
This typically corresponds to
the start of normal business
hours at your site. During
the hours when the sleep
state is inhibited, the phone
can go into an idle state, but
it cannot go into a sleep
state.
CFG
Table 23: Configuration Parameters
Group Parameter
Value Format and
Default
Description Source