Specifications

Configuring and Maintaining 400-Series IP Phones Specifying Configuration Parameters on a Phone
5
ShoreTel 14 Maintenance Guide 131
Ethernet Network port Choose automatic configuration (“Auto”) or choose speed and duplex
modes. The recommended value is Auto.
PC port Choose to disable the PC port, or choose automatic configuration
(“Auto”) or speed and duplex modes. The recommended value is Auto.
802.1Q On or off, as dictated by the Use 802.1Q option in the Network policy
menu
VLAN ID The Virtual LAN identifier
The default is 0, which means that VLAN tagging is disabled.
PCP The IEEE P802.1p Priority Code Point (PCP) value
The default value is 5.
Use 802.1X Choose to enable or disable IEEE 802.1X link layer authentication. If
enabled, enter the username and password.
Note the following points about 802.1X usage:
 If the phone has 802.1X turned on but the network does not have
802.1x authentication, the phone functions normally (and does not
need a username and password).
 If the network has 802.1X and the phone's user name and password
credentials are missing or invalid, the phone prompts for a username
and password on startup.
Username The user name to enable 802.1X link layer authentication
Password The password to enable 802.1X link layer authentication
Authenticated The current status of 802.1X authentication
Table 20: Phone Information for ShoreTel 400-Series IP Phones (Continued)
Admin Options
Menu Item
Option Name Description